Every wash and dry tool on your boat — organized, protected, and exactly where you left it.
What's Included:
-
3x TidyBoat Brush Head Organizers — dedicated holders for your boat brushes and shammy mop heads
-
2x TidyBoat Shammy & Water Blade Organizers — secure mounts for your shammy container and water blade
One System for All Your Cleaning Gear
Most boats have a cleaning problem. It is not that boaters do not clean — it is that their gear has nowhere to live. Brush heads roll around in lockers. Shammies get folded into compartments where they dry out and pick up grime. Water blades get tossed wherever there is space and end up warped or forgotten. After a washdown, the whole routine is slower than it needs to be because nothing is where it should be.
The TidyBoat 5-Piece Boat Organization System fixes that. This kit combines three TidyBoat Brush Head Organizers with two TidyBoat Shammy & Water Blade Organizers to give every wash and dry tool on your boat a dedicated, protected home.
Every piece mounts with heavy-duty 3M adhesive. No drilling. No tools. No hardware. Peel, press, and your boat storage system is set.
What Each Holder Does
TidyBoat Brush Head Organizers (Set of 3)
Deck brushes are one of the most-used tools on any boat, and the brush heads take the most abuse. When they roll around in a locker or get stacked under other gear, the bristles get crushed, the heads get contaminated, and they wear out faster than they should.
These organizers mount directly to smooth marine surfaces and hold brush heads elevated and secure. They are compatible with all Captains Preferred Products brush heads, including the shammy mop head, and fit any universal spring-pressure pin connect brush head. Three organizers give you enough spots to store a full lineup of brush heads — soft bristle, medium bristle, stiff bristle — all within reach.
- Holds brush heads off the floor and away from grit and moisture
- Keeps bristles in proper shape between uses
- Compatible with Captains Preferred Products brush heads, shammy mops, and universal pin-connect attachments
- Mounts to fiberglass, gelcoat, and smooth non-porous surfaces
TidyBoat Shammy & Water Blade Organizers (Set of 2)
After you rinse down the boat, the drying phase is where most gear takes its worst beating. Shammies get rolled up and stuffed into compartments. Water blades get dropped or left on deck. Over time, they get bent, cracked, or contaminated, and you end up replacing tools you should not have to.
The Shammy & Water Blade Organizers give each of those tools a secure, dedicated mount. Each organizer holds either a shammy container or a water blade and mounts with the same industrial-strength 3M adhesive as the brush organizers. With two in the kit, you can cover two different areas of the boat or store both drying tools in the same zone.
- Holds your shammy container or water blade secure and accessible
- Keeps drying tools off the deck and out of cluttered lockers
- Dual-purpose design fits either tool — no separate mounts needed
- Mounts to fiberglass, gelcoat, and smooth non-porous surfaces
Key Features of the Full System
-
Complete Coverage: Three brush head spots plus two drying tool mounts. Every cleaning tool on your boat has a place.
-
Heavy-Duty 3M Mounting: All five organizers use industrial-strength 3M adhesive that bonds firmly to fiberglass, gelcoat, and smooth non-porous marine surfaces.
-
No Drilling Required: Peel, stick, and press. The entire system installs in minutes without any tools or hardware.
-
Protects Your Gear: Elevated storage keeps brush heads dry, bristles shaped, and drying tools free from grit and damage.
-
Marine-Ready Construction: Built to handle moisture, salt air, humidity, and everyday use on the water.
-
Faster Washdowns: When everything has a home, your cleanup routine runs smoother. Grab what you need, put it back when you are done.
Installation Tips
- Choose a flat, smooth, non-porous surface for each mount — fiberglass and gelcoat work best.
- Clean the surface with the included alcohol pads and let it dry completely before applying.
- Press each organizer firmly in place for at least 30 seconds.
- Allow the adhesive to cure fully before loading with gear.
- Not recommended for wood or other porous surfaces.
Brush heads, shammy, and water blade sold separately.
