Instructions & Directions for Use

Table of Contents:

 

Salt Remover Soap - Directions for Use:
  1. Rinse the affected areas with fresh water to remove loose salt and debris.
  2. Using a brush or wash mitt, apply Captain's Fury Salt Remover Soap directly to the area.
  3. Scrub the area thoroughly, working up a lather.
  4. Rinse the surface completely with fresh water.

Manufacturer's liability is limited to the purchase price of this product.

 

Salt Remover Spray - Directions for Use:
  1. Rinse the affected areas with fresh water to remove loose salt and debris.
  2. Spray Captain's Fury Salt Remover Spray directly onto the surface.
  3. Allow the solution to sit for 5-10 minutes to break down the salt deposits. Heavy salt buildup may require scrubbing with a brush.
  4. Rinse thoroughly with fresh water and allow surface to air dry.

Manufacturer's liability is limited to the purchase price of this product.

 

Quick Detailer Spray - Directions for Use:
  1. Shake bottle well before use.
  2. Working in sections, Spray Captain’s Fury Quick Detailer Spray onto cool exterior surface.
  3. Allow product to sit for 15-30 seconds to encapsulate dirt and contaminants.
  4. Using a clean and dry microfiber towel, wipe away excess product and contaminants.
  5. Use a second clean microfiber towel or buffing pad to buff the area to a shine.
  6. Repeat in sections until the desired area is cleaned and protected.

<Manufacturer's liability is limited to the purchase price of this product.

 

Foam Cannon Soap - Directions for Use:

DIRECTIONS (USING FOAM CANNON):

  1. Fill the foam cannon 1/4 of the way with Captain's Fury Foam Cannon Soap.
  2. Add water to fill the remainder of the reservoir and replace the top.
  3. Use the foam cannon as directed, adjusting the foam dial to use more or less soap.
  4. Use a boat brush or wash mitt to scrub away stubborn dirt and stains.
  5. Rinse thoroughly with fresh water.
  6. Dry all surfaces to prevent water spots.

DIRECTIONS (WITHOUT FOAM CANNON):

  1. Wet the surfaces to be cleaned with fresh water.
  2. Mix ~one ounce of soap with one gallon of fresh water.
  3. Using the soap solution, scrub all surfaces with a boat brush or wash mitt.
  4. Rinse thoroughly with fresh water.
  5. Dry all surfaces to prevent water spots.

Manufacturer's liability is limited to the purchase price of this product.

 

Wash + Wax Boat Soap - Directions for Use:

  1. Wet the surfaces to be cleaned with fresh water.
  2. Mix 1-2 capfuls of Captain’s Fury Wash + Wax Boat Soap with one gallon of fresh water.
  3. Using the soap solution, scrub all surfaces with a boat brush or wash mitt.
  4. Rinse thoroughly with fresh water.
  5. Dry the surfaces with a shammy or water blade to prevent water spots.

Manufacturer's liability is limited to the purchase price of this product.

 

Heavy-Duty Deck Cleaner - Directions for Use:
  1. Captain's Fury Heavy-Duty Deck Cleaner
  2. Allow it to sit for 2-3 minutes.
  3. Scrub the area with a hard-bristle deck brush until the stain is gone.
  4. Rinse thoroughly with fresh water.
  5. Tough stains may require a second application.

Manufacturer's liability is limited to the purchase price of this product.

 

Heavy-Duty Hull Cleaner - Directions for Use:
  1. Shake well before use. Use of rubber gloves recommended.
  2. Apply Captain's Fury Heavy-Duty Hull Cleaner evenly on hull surface.
  3. Allow to remain on surface for 2 minutes, then rinse with fresh water.
  4. Tough stains may require a second application or rubbing the stain with a microfiber rag after application.
  5. For best results, use when temperature is above 50°F.

Manufacturer's liability is limited to the purchase price of this product.

 

Rust Stain Remover - Directions for Use:
  1. Spray Captain's Fury Rust Stain Remover directly on the surface of the stain.
  2. Let the product sit for 1-2 minutes, then rinse with fresh water.
  3. Tougher stains may require a second application and scrubbing.
  4. For fabric or vinyl surfaces, test in a small area before full application.

Manufacturer's liability is limited to the purchase price of this product.

 

Mildew Stain Remover - Directions for Use:
  1. Spray Captain's Fury Mildew Stain Remover directly onto the affected surface.
  2. Allow the solution to sit for 2-3 minutes, then scrub with a microfiber rag or brush.
  3. Rinse thoroughly with fresh water. Stubborn stains may require a second application.
  4. For fabric or vinyl surfaces, test in a small area before full application.

Manufacturer's liability is limited to the purchase price of this product.

 

Aluminum Boat Cleaner - Directions for Use:

PREPARE SURFACE: Product should only be used on unpainted raw aluminum surfaces. Before application, clean the surface to remove dirt and grit.

  1. Using a brush, spread the product evenly over the area to be treated.
  2. Avoid dripping on surrounding areas and equipment. If spills occur, rinse immediately.
  3. Leave the product on the surface 3-5 minutes before rinsing thoroughly with fresh water.
  4. Tough stains may require a second application and scrubbing with a stiff brush.
  5. Do not allow product to dry on surface.

Manufacturer's liability is limited to the purchase price of this product.

 

Rubber + Inflatable Boat Cleaner - Directions for Use:
  1. Rinse the surface to remove any loose dirt and debris. Dry the area thoroughly.
  2. Shake bottle well before use.
  3. Using a clean dry cloth, apply Captain's Fury Rubber & Inflatable Boat Cleaner to the desired area.
  4. Allow the solution to sit for 2-3 minutes.
  5. Using a clean dry cloth, brush, or boat eraser sponge, scrub the area to loosen and remove dirt.
  6. Rinse thoroughly with fresh water. Tough stains may require a second application.

Manufacturer's liability is limited to the purchase price of this product.

 

All-Surface Cleaner - Directions for Use:
  1. Spray All Surface Cleaner on the desired surface.
  2. With a clean rag or sponge, gently wipe the entire surface to be cleaned.
  3. Let cleaner sit for 15-30 seconds.
  4. Use a boat eraser sponge, rag, or sponge to scrub the surface. Deep stains may require more than one cleaning.
  5. Rinse area with fresh water.

Manufacturer's liability is limited to the purchase price of this product.